BACK TO JABSCO PUMPS PAGE    GO TO MANUFACTURES LIST

MARINE SUBMERSIBLES  & DIAPHRAGM BILGE PUMPS

MANUAL BILGE PUMPS & BILGE ACCESSORIES 

FILL OUT INFO FORM OR E-MAIL US TO RECEIVE A DISCOUNTED QUOTE. INSTANTLY PURCHASE A JABSCO PUMP IN OUR 
ONLINE SHOPPING SECTION.

1. AMAZON WARRIOR
If you have a larger yacht or commercial craft then the Warrior is for you. Made from robust aluminum alloy with twin diaphragms for added safety, the Warrior is capable of an amazing 135 lpm (30gpm) and has a big 45cm (18") handle for easy pumping whether mounted on or through deck.

Part numbers:
29280-0000 Warrior 38mm (1 1/2") hose
29279-0000 Optional Through Deck Kit
29289-0000 Under deck bracket (required for installation with 29279-0000)

2. AMAZON UNIVERSAL
Our most versatile manual bilge pump which can be mounted on or through the bulkhead or deck. Designed for larger and medium sized boats with a flow rate of up to 100 lpm (22 gpm) the Universal is equally good at emptying holding tanks and has excellent solids handling ability.

Part numbers:
29270-0000 Universal 38mm (1 1/2") hose       29279-0000 Optional through deck kit

3. AMAZON THRUDECK
The Thrudeck is available with 25mm (1") or 38mm (1 1/2") ports giving 50 lpm (11 gpm) or 75 lpm (17.5 gpm) output. The design allows unlimited variation of port direction and easy access to the whole pump chamber and valves.

Part numbers:
29250-0000 25mm (1") hose       29259-0010 38mm (1 1/2") hose

4. AMAZON BULKHEAD
The smallest pump in our range designed specifically for smaller boats but still giving a powerful output of 45 lpm (10 gpm). Suitable for mounting on bulkhead or deck it has multi-positioned ports and body which give an amazing 96 assembly variations.

Part number:
29240-0000 25mm (1") hose

BILGE PUMP ACCESSORIES

Part number:    45490-0000


JABSCO FLOAT SWITCH
Float switch to automatically operate 12, 24 or even 32 volt bilge pumps or alarms. For any bilge pump drawing up to 20 amps this new switch offers dependable pump operation from its fully sealed components. Cover is available separately to guard against accidental jamming of the switch by bilge debris.

Part numbers:  30295-2000 Switch 12/24/32V     30294-2000 Cover

1. BILGEMASTER Not available in North America
Designed to control any pump (12 or 24V up to 30 amps) operated via an automatic switch. 3 way switch with "automatic", "off" or "on" positions. An amber light shows when automatic is selected and a red light shows when the pump is operating. It's even water resistant so it can be mounted in exposed locations.

Part number:    29140-000

2. MASTER SWITCH
If you're not controlling your bilge pump via an automatic switch our Master Switch provides simple on/off operation for any 12 or 24 volt bilge pump rated up to 10 amps. We supply 7 labels as the switch might be used for anything from showers to blowers. There are two versions, either lighted or unlighted.

Part numbers:    44960-002 Illuminated model 12V only
Part numbers:    44960-003 Non-illuminated model 12 & 24V

3. VACUUM SWITCH
Especially useful to protect your Flexible Impeller pumps from damage through extended periods of dry running. The Vacuum Switch mounts directly to some Jabsco pumps and cuts power to the motor when there is no fluid in the inlet plumbing. Suitable for both 12 and 24 volt pumps.

Part number:    4732-0000

4. HYDRO AIR SWITCH
Designed to give real peace of mind and reliability. Rising bilge water pressurises air in the bell and tube to activate the diaphragm switch. The Hydro Air Switch comes preset to switch the bilge pump or alarm on when the water reaches 50mm (2") and off again when it drops below 13mm (1/2"). It can also be adjusted to suit individual needs.

Part number:    34875-0000 12/24V

6. BILGE STRAINERS
Strainers prevent bilge debris from blocking pump inlet hose and are fitted with a non-return valve to stop backflow of water into the bilge. Available for both 25mm and 38mm (1" and 1 1/2") hose.

Part numbers: 29290-0000 (25mm hose)
Part nu29290-0010 (38mm hose)

7. BILGE PUMPGARD
Simple to install, inspect and clean providing protection from bilge debris. Ports for 19mm (3/4") hose. Part number:    36200-0000

8. NON-RETURN VALVES
Non-return valves help priming and prevent backflow of water into the bilge. There are three sizes for 19mm, 25mm and 38mm (3/4", 1" and 1 1/2") hose.

Part numbers:    29295-0020 (19mm hose)    29295-0000 (25mm hose)    29295-0010 (38mm hose)

| Info form | E-mail | Contents | Home |

COPYRIGHT 2008 MARINE PARTSFINDERS®