|
| | BACK
TO JABSCO PUMP PAGE
NEXT
IMPELLER PAGE
 FLEXIBLE
IMPELLER & BILGE PUMPS
FILL
OUT INFO FORM OR E-MAIL
US TO RECEIVE A DISCOUNTED QUOTE. INSTANTLY PURCHASE A JABSCO PUMP IN
OUR
ONLINE
SHOPPING SECTION.
1. WATER PUPPY
The workhorse of our range! Designed for bilge pumping, or general transfer
duty. Self priming up to 1.2m (4ft), with an output of 1920 lph (420 gph), this
pump is built to the same high spec as the Maxi Puppy.
| Part
Number |
Ports
(Int.) |
Ports
(Ext.) |
CE |
Vdc |
Flow
GPM
(LPM) |
| 06360-1001 |
¾"NPT |
1"GHT |
X |
12 |
6.3
(24) |
| 23680-2003 |
½"BPS |
1"
slip-on |
X |
12 |
7.0(31.7) |
| 23680-2103 |
½"BPS |
1"
slip-on |
X |
24 |
7.0(31.7) |
Flow @ 10' (3m) total
head
2. UTILITY PUPPY 2000
This pump gives the same performance in
all aspects as the Water Puppy but its clever pump design means it will run dry
for up to 20 minutes without damage.
| Part
Number |
Ports
(Int.) |
CE |
Vdc |
Flow
GPM
(LPM) |
| 23920-9403 |
¾"NPT |
X |
12 |
7.0(31.7) |
| 23920-2403 |
¾"BPS |
X |
12 |
7.0(31.7) |
| 23920-9503 |
¾"NPT |
X |
24 |
7.0(31.7) |
| 23920-2503 |
¾"BPS |
X |
24 |
7.0(31.7) |
Flow @ 10' (3m) total
head
3. MAXI PUPPY
A high pressure and flow pump for bilge
pumping and deckwash. Self priming up to 2.4m (8ft) with an output of 2640 lph
(600 gph). It's built to last with a bronze pump head and oil resistant nitrile
impeller.
| Part
Number |
Ports
(Int.) |
Ports
(Ext.) |
CE |
Vdc |
Flow
GPM
(LPM) |
| 16360-1003 |
¾"NPT |
1"GHT |
X |
12 |
7.8(30) |
| 23610-2003 |
- - |
1"
slip-on |
X |
12 |
10(44) |
| 23610-2103 |
- - |
1"
slip-on |
X |
24 |
10(44) |
Flow @ 10' (3m) total
head
4. UTILITY PUPPY 3000
The heavy duty Puppy pump. Suitable for
commercial applications or prolonged hard use. Flow and performance are as per
the Maxi Puppy, but the Utility Puppy 3000 boasts ten minutes dry running and an
indestructible mechanical seal for long life.
| Part
Number |
Ports
(Int.) |
CE |
Vdc |
Flow
GPM
(LPM) |
| 23920-9213 |
¾"NPT |
X |
12 |
11(48.4) |
| 23920-2213 |
¾"BPS |
X |
12 |
11(48.4) |
| 23920-9313 |
¾"NPT |
X |
24 |
11(48.4) |
| 23920-2103 |
¾"BPS |
X |
24 |
11(48.4) |
Flow @ 10' (3m) total
head
HEAVY DUTY BILGE PUMPS
Jabsco have made an important addition to their range of
successful DC flexible impeller pumps.
Based on the proven Jabsco design, the new Utility Puppy has the unique
feature of being able to run dry for up to 10 minutes after the initial prime.
Therefore there is less worry of damaging the impeller by forgetting to switch
the pump off. This versatility is further enhanced by the pumps ability to
self prime up to a 2.4 meter vertical lift.
Simply constructed, the Utiltiy Puppy
has few wearing parts, all of which are service friendly and easily
accessible.
Debris presents no problem to this
robust, bronze bodied pump. It is therefore ideal for use in bilge pumping and
general liquid transfer, including water and diesel fuel.
The Utility Puppy is available with
either a 12V or 24V continuous rated DC motor. There is also a choice of a 35
litre version with lipseal, or a 45 litre version with a mechanical seal for
commercial heavy duty applications. It has 3/4" BSP internal ports.
JABSCO UTILITY PUPPIES TECHNICAL
SPECIFICATIONS
| Part
Numbers: |
23920-2403 12 volt DC -
UTILITY PUPPY 2000
23920-2503 24 volt DC - UTILITY PUPPY 2000
23920-2213 12 volt DC - UTILITY PUPPY 3000
23920-2313 24 volt DC - UTILITY PUPPY 3000
|
| Applications: |
Bilge pumping, pressure
washdown, Bait tank circulation, anchor washing, water boosting. |
| Materials: |
Cast Bronze body with Nitrile
Oil resistant impeller. |
| Water
seal: |
UTILITY PUPPY 2000 - Lip
type.
UTILITY PUPPY 3000 - Mechanical type. |
| Connections: |
3/4" BSP Internal ports
to BS21 |
| Performance: |
UTILITY PUPPY 2000 - 36.5 l/m
at 1m head, Self Priming to 1.2m
UTILITY PUPPY 3000 - 47.5 l/m at 1m head, Self Priming to 2.4m
WILL RUN DRY FOR UP TO 10 MINUTES AFTER
INITIAL PRIME HORIZONTAL DISCHARGE PIPE, WITH VERTICAL DISCHARGE THIS
IS INCREASED TO OVER 20 MINUTES.
|
| Motor
rating: |
Continuous duty. |
| Weight: |
UTILITY PUPPY 2000 - 3.2 Kgs
UTILITY PUPPY 3000 - 3.9 Kgs |
| Fuse
Size: |
UTILITY PUPPY 2000 - 15 amp
(12v), 10 amp (24v)
UTILITY PUPPY 3000 - 25 amp (12v), 15 amp (24v) |
| Amp
Draw: |
UTILITY PUPPY 2000 - 13 amp
(12v), 7.5 amp (24v)
UTILITY PUPPY 3000 - 21 amp (12v), 11 amp (24v) |
TOP
MORE IMPELLER PUMPS, NEXT PAGE
BACK TO JABSCO PUMPS BACK
TO BRAND LIST
|
