|
| |
BACK
TO FLOJET MAIN PUMPS PAGE
 |
FLOJET
DIAPHRAGMS, WASHDOWN, BAIT, SHOWER & BOTTLE WATER PUMPS |
FILL OUT INFO FORM OR E-MAIL
US TO RECEIVE A DISCOUNTED
QUOTE
SELF-PRIMING
(FOR ABOVE WATERLINE)
 |
FLOJET
SELF-PRIMING DIAPHRAGMS IN 12 & 24VDC
The Flojet
self-priming diaphragm pump will lift up to 6 feet, run dry without
damage, and deliver up to 1.5 gpm. Pump comes standard
with quick connect 1/2" barbed ports.
Additional port options are shown in PUMP FITTINGS. |
 |
FLOJET WASHDOWN
PUMP
 |
Our automatic, high velocity,
self priming deck and anchor washdown pump will provide dockside
convenience aboard. This pump turns on automatically, and then turns off
when hose nozzle is opened and closed. Built for fresh or salt water use.
Shuts off at 45 psi. Easily installed. 3/4" barbed, slip-on hose
ports plug into pump. Model-XXX includes two 3/4" hose barb ports,
two garden hose adapters and a 3/4" barb inline strainer. Model-XXXL
includes two 3/4" hose barb ports, two garden hose adapters, a
3/4" barb inline strainer and a sprayer. SEE BREAKDOWN
PAGE FOR PARTS. |
|
|
BILGE & BAIT
PUMP
| The FLOJET
self priming Pump can be run dry and will gulp that last bit of water. The
pump may be mounted up to 6 feet above the bilge
and will discharge over 5 GPM while drawing only 8.5 amps. Installation is
simple, 3/4" barbed, slip-on hose ports plug into pump. Can be
operated with manual on-off switch or with automatic level control.
(Switch or level control not provided.) Meets USCG electrical
requirements. Includes two 3/4" Hose Barbs, two garden hose adapters
and a 3/4" Barb Inline Strainer. SEE BREAKDOWN
PAGE FOR PARTS |
 |
|
|
FLOJET 4105 SERIES SHOWER PUMP
|
FLOJET transfer pump for
shower and grey water. Runs dry without harm. Pump
can be operated with manual on-off switch or automatic level control.
(Switch or level control not provided.) Includes two 1/2" barb port
fittings. Install strainer between shower pan and pump inlet. See OUR BREAKDOWN
PAGE FOR PARTS. |
|
|
115VAC
& 12VDC BOTTLED WATER DISPENSER
| This
compact system is ideal for automatically supplying bottled water to a
refrigerator ice/water dispenser and/or a water tap. It
comes complete with a demand water pump, 20 feet of 1/4" discharge
tube, suction tube with universal cap for a 5 gallon jug, and float switch
for automatic shutoff when the bottle is empty. There are two voltages
(12vdc and 115vac) available and an optional discharge faucet. |
 |
|
|
BACK
WATER SYSTEMS PUMP BREAKDOWNS, STRAINERS &
FITTINGS |
