Marineparts.com - Replacement Skegs

Replacement Skegs

Bay outboard & I/O skeg replacements are made to replace the original skeg on outboard and I/O drive units that have been broken off or damaged so full protection of the prop can be maintained.

They cost only a fraction of replacement of the entire gear case and are shaped to within 1/2” of the torpedo section of the housing, this allows room to grind and fit the replacement skeg to the original, without warpage to the housing if proper welding techniques are used.

A measurement to determine proper skeg needed, is taken 1/2” below the torpedo section of the gearhousing.

SKEGS SHOWN FIT MANY OTHER MODEL MOTORS THAN THOSE LISTED W/ SLIGHT ALTERATION

Straight 10" x 5"

Bay outboard & I/O skeg replacements are made to replace the original skeg on outboard and I/O drive units that have been broken off or damaged so full protection of the prop can be maintained.

They cost only a fraction of replacement of the entire gear case and are shaped to within 1/2” of the torpedo section of the housing, this allows room to grind and fit the replacement skeg to the original, without warpage to the housing if proper welding techniques are used.

A measurement to determine proper skeg needed, is taken 1/2” below the torpedo section of the gearhousing.

Fits on Models:
Merc 80-150HP Inline
OMC 1969, 70, 71 50-55-60HP
Suzuki 115
Force 85 & 125

Base SKU:130300

In Stock:No

Price: $0.00

Quantity:

Straight 11" x 5.5"

Base SKU:130500

In Stock:No

Price: $0.00

Quantity:

Straight 14" x 5.5"

Base SKU:130700

In Stock:No

Price: $0.00

Quantity:

Straight 8.5" x 4.5"

Bay outboard & I/O skeg replacements are made to replace the original skeg on outboard and I/O drive units that have been broken off or damaged so full protection of the prop can be maintained.

They cost only a fraction of replacement of the entire gear case and are shaped to within 1/2” of the torpedo section of the housing, this allows room to grind and fit the replacement skeg to the original, without warpage to the housing if proper welding techniques are used.

A measurement to determine proper skeg needed, is taken 1/2” below the torpedo section of the gearhousing.

Fits on Models:
Merc 40-70HP
OMC 1969, 70, 71 50-55-60HP
OMC 1975 & 79 75 HP
Suzuki 55, 65 75 & 85
Nissan 40, 50, 60, 70 & 80

Base SKU:130100

In Stock:No

Price: $0.00

Quantity:

Swept 10" x 6.5"

Bay outboard & I/O skeg replacements are made to replace the original skeg on outboard and I/O drive units that have been broken off or damaged so full protection of the prop can be maintained.

They cost only a fraction of replacement of the entire gear case and are shaped to within 1/2” of the torpedo section of the housing, this allows room to grind and fit the replacement skeg to the original, without warpage to the housing if proper welding techniques are used.

A measurement to determine proper skeg needed, is taken 1/2” below the torpedo section of the gearhousing.

Fits on Models:
MERC 75, 90, 115 & V-6
OMC 400 Outdrive
Suzuki 140, 150, 175, 200
Yamaha V-4 & V-6

Base SKU:130400

In Stock:No

Price: $0.00

Quantity:

Swept 10.5" x 5.5"

Bay outboard & I/O skeg replacements are made to replace the original skeg on outboard and I/O drive units that have been broken off or damaged so full protection of the prop can be maintained.

They cost only a fraction of replacement of the entire gear case and are shaped to within 1/2” of the torpedo section of the housing, this allows room to grind and fit the replacement skeg to the original, without warpage to the housing if proper welding techniques are used.

A measurement to determine proper skeg needed, is taken 1/2” below the torpedo section of the gearhousing.

Fits on Models:
OMC V-4, V-6, 90, 115, 120, 140, 150, 175
Cobra 175 & 260

Base SKU:130800

In Stock:No

Price: $0.00

Quantity:

Swept 12" x 5"

Base SKU:130600

In Stock:No

Price: $0.00

Quantity:

Swept 9" x 4.5"

Bay outboard & I/O skeg replacements are made to replace the original skeg on outboard and I/O drive units that have been broken off or damaged so full protection of the prop can be maintained.

They cost only a fraction of replacement of the entire gear case and are shaped to within 1/2” of the torpedo section of the housing, this allows room to grind and fit the replacement skeg to the original, without warpage to the housing if proper welding techniques are used.

A measurement to determine proper skeg needed, is taken 1/2” below the torpedo section of the gearhousing.

Fits on Models:
OMC 1973, 74, 77, 79 - 50HP
OMC 1973 & 74 - 85 & 135HP
OMC 1974 & 75 - 65 & 70HP

Base SKU:130200

In Stock:No

Price: $0.00

Quantity: