Chrysler V8 - 273, 318, 340, and 360 C.I.D.
All Models. 1966 and Up Log Style Direct Replacement
Click on Pictures or Part Numbers below to check price
 

<previous catalog page

next catalog page>

Note:
CM-1-6672A, CM-1-6677A, CM-20-6672, CM-20-6674 and CM-20-2847405 include all mounting hardware, gaskets and plugs. Swivel-style connector packages must be purchased separate for the corresponding riser/elbows. See next page for part numbers.

CM-1-6672A Direct replacement water cooled
manifold for model years 1966 to1972. Now replaced by CM-1-6677A

CM-1-6677A Direct replacement water cooled
manifold for model years 1966 to 1986.

CM-20-2600402 Exhaust riser lower elbow. Direct
replacement for Chrysler part #2600402.

CM-20-2847405 90 degree exhaust elbow. Direct replacement
for Chrysler part #’s 2847405 and 2469639

CM-20-4142411 Exhaust riser/upper elbow. Direct
replacement for Chrysler part #’s 3745639, 2847623, 2487404 and E9233M

CM-20-6672 Fully jacketed 20 degree exhaust elbow.
Accepts 3” I.D. exhaust hose. Direct replacement for Chrysler part #
3527794. Will mount directly to manifold or can be used with riser
# CM-20-6674.

CM-20-6674 Fully jacketed exhaust riser. 6” riser protection. Direct replacement for Chrysler part # 2846689.

CM-20-9232 6” exhaust elbow high riser extension.Direct replacement for Chrysler part # E9232M.

CM-1-6672B Front end plate without the water connector, (1) required per manifold (Chrysler part # 2846106). May require mounting kit # CM-1-6672B-P (shown on next page). Order the appropriate end flanges and fittings according to your requirements.

CM-1-6672C Adaptor for rear end of manifold. Use with Barr style exhaust risers or elbows, (1) required per manifold.

CM-1-6672E Copper water distribution tube, (1) required per manifold. Replaces original tube (Chrysler part # 3527781) where used. Will fit both
manifold styles.

CM-1-6672H Front end plate with 1/2” N.P.T. water connection. For use where water connection is made from the front of the manifold. Will replace Chrysler part # 3527869, (1) required per manifold. May require mounting kit # CM-1-6672B-P (show on next page). Will fit both manifold styles.

CM-1-6677P Manifold to cylinder head mounting kit (Order (1) of the appropriate mounting kits according to your requirements).

CM-1-6677SS-P Stainless steel manifold to cylinder head mounting kit (includes stainless studs, nuts, manifold to head gaskets and brass drain plugs). Not pictured.

CM-20-6672P Mounting kit for exhaust elbow connector
for raw water cooled manifold (includes bolts, gasket and pipe plug).

<previous catalog page

next catalog page>