|
next
BATTERY CHARGERS page
GUEST BATTERY CHARGERS
FILL
OUT THE INFO FORM OR E-MAIL
US TO RECEIVE
A
DISCOUNTED QUOTE OR MORE INFORMATION

ON- BOARD WATERPROOF BATTERY CHARGERS

| Ferroresonant Charger Specifications |
30,
40 and 50 amp models
9"W x 12-1/2"H x 7-1/4"D |
| Model |
Amps Output
Continuous/Intermittent |
# Banks |
Volts/Cycles |
| 2515C-B |
15/20 |
2 |
115/60 |
| 2520C-B |
20/30 |
3 |
115/60 |
| 2530C-B |
30/50 |
3 |
115/60 |
| 2540C-B |
40/60 |
4 |
115/60 |
| 2550C-B |
50/70 |
4 |
115/60 |
| International Model |
Amps Output
Continuous/Intermittent |
# Banks |
Volts/Cycles |
| 2520C-B-50-230 |
20/30 |
3 |
230/50 |
| 2550C-B-50-115 |
50/70 |
4 |
115/50 |
| 2550C-B-50-230 |
50/70 |
4 |
230/50 |
20 and 30 amp models
6-1/2"W x 12"H x 5-1/8"D |
#2613 Weekend Angler Charger
A versatile, full-featured charger for the value-conscious angler who doesn't require
immediate recharge of trolling motor batteries, but wants a separate output to maintain
the cranking battery.

A full-featured onboard charger designed for the weekend angler, Model 2613 has a fully
independent 3 amp output for cranking and two 5 amp outputs for trolling or house
batteries. Total output for this versatile unit is 13 amps. Prewired with one 6-ft. AC
cord and three 4-ft. DC outputs.
| #2613 Weekend Angler Charger Specifications |
| Amps Output |
# of Banks |
Battery System |
Recovery Time* |
| 13** |
3 |
1 - 12v cranking
2 - 12v or 24v |
10-12 hours |
| Wiring Supplied |
Dimensions |
Weight |
1 - 6' AC cord
3 - 4' DC outputs |
9-1/4"W x 6"H x 3-1/4"D |
10 lbs. |
* Approximate time to restore deep cycle batteries at 60%
discharge
** The 3 amp independent output will charge and maintain the cranking battery.
Note: Operating voltage for all waterproof battery chargers is 115 volts/60Hz.
Note: All waterproof charger models have independent grounds. |
#2615
For 12 volt systems. |
|
| #2615 Specifications |
# Stages |
Amps Output |
# Banks |
Recovery Time* |
| 2 |
15 |
2 |
6-7 hours |
| Operating Voltages |
Dimensions |
| 90-140vAC/50-60Hz |
7-7/8"W x 9"H x 4"D |
| * Approximate time to restore deep cycle batteries at 60%
discharge. |
|
#2616A
For 12/24 volt configurations. |
| #2616A Specifications |
| # Stages |
Amps Output |
# Banks |
Recovery Time* |
| 3 |
15 |
2 |
6-7 hours |
| Operating Voltages |
Dimensions |
| 90-140vAC/50-60Hz |
7-7/8"W x 9"H x 4"D |
| * Approximate time to restore deep cycle batteries at 60%
discharge. |
#2617
For 12/24/36 volt configurations. |
|
| #2617 Specifications |
| # Stages |
Amps Output |
# Banks |
Recovery Time* |
| 3 |
15 |
3 |
6-7 hours |
| Operating Voltages |
Dimensions |
| 90-140vAC/50-60Hz |
7-7/8"W x 9"H x 4"D |
| * Approximate time to restore deep cycle batteries at 60%
discharge. |
#2620 Serious Fisherman Charger
A high performance charger for serious fishermen.

For serious fishermen, or for small cruisers with two house batteries, high performance
Model 2620 supplies 20 amps via two individual 10 amp circuits for totally indepdent
charging of two batteries. Designed for 12 or 24 volt systems.
| #2620 Serious Fisherman Charger Specifications |
| Amps Output |
# of Banks |
Battery System |
Recovery Time* |
| 20 |
2 |
2 - 12v or 24v |
5 hours |
| Wiring Supplied |
Dimensions |
Weight |
1 - 6' AC cord
2 - 6' DC outputs |
9-1/4"W x 6"H x 3-1/4"D |
10 lbs. |
* Approximate time to restore deep cycle batteries at 60%
discharge
Note: Operating voltage for all waterproof battery chargers is 115 volts/60Hz.
Note: All waterproof charger models have independent grounds. |
#2623 Professional Charger
For the professional who requires an independent 3 amp output to keep the cranking
battery fresh and two 10 amp outputs to recharge trolling and house batteries quickly.

Unique in its treatment of cranking versus trolling batteries, Model 2623 is designed
for professional fishermen using Group 24, Group 27 or Group 30 batteries in a 12 or 24
volt system with a cranking battery. It has an independent, dedicated 3 amp output to keep
the cranking battery fresh, and two 10 amp outputs to recharge trolling and house
batteries quickly. Prewired with three 6-ft. outputs and a 6-ft. AC cord.
| #2623 Professional Charger Specifications |
| Amps Output |
# of Banks |
Battery System |
Recovery Time* |
| 23 |
3 |
1 - 12v cranking
2 - 12v or 24v |
5 hours |
| Wiring Supplied |
Dimensions |
Weight |
1 - 6' AC cord
3 - 6' DC outputs |
12-5/8"W x 6"H x 3-1/4"D |
13 lbs. |
* Approximate time to restore deep cycle batteries at 60%
discharge
Note: Operating voltage for all waterproof battery chargers is 115 volts/60Hz.
Note: All waterproof charger models have independent grounds. |
|
#2630
The large, anodized aluminum heat sink on this solid state power supply ensures cool
operation and longer component life. Model #2630 provides 30 amps of charging power to
three separate battery banks and features a built-in ammeter. |
| #2630 Specifications |
| # Stages |
Amps Output |
# Banks |
Recovery Time* |
| 2 |
30 |
3 |
6-7 hours |
| Operating Voltages |
Dimensions |
| 90-140vAC/50-60Hz |
9"W x 12-1/4"H x 7-1/4"D |
| * Approximate time to restore deep cycle batteries at 60%
discharge. |
#2631 Tournament Pro Charger
The ultimate 30 amp charger for tournament pros and small cruisers.

Model 2631, with three 10 amp chargers in one housing, is the ultimate 30 amp charger
for tournament pros, professional fishermen and small cruisers who use house batteries
heavily and who need the fastest full charging available. Designed for 12, 24 or 36 volt
systems, three independent 10 amp outputs provide constant charging for each battery.
Comes prewired with three 6-ft. outputs and a 6-ft. AC cord.
| #2631 Tournament Pro Charger Specifications |
| Amps Output |
# of Banks |
Battery System |
Recovery Time* |
| 30 |
3 |
3 - 12v in 12v,
24v or 36v config. |
5 hours |
| Wiring Supplied |
Dimensions |
Weight |
1 - 6' AC cord
3 - 6' DC outputs |
12-5/8"W x 6"H x 3-1/4"D |
13 lbs. |
* Approximate time to restore deep cycle batteries at 60%
discharge
Note: Operating voltage for all waterproof battery chargers is 115 volts/60Hz.
Note: All waterproof charger models have independent grounds. |
CLICK HERE FOR INFORMATION ON GUEST BATTERY ISOLATORS
AND SYSTEMS VOLTAGE SCANNERS
|