|
|||||||||||
| ||||||||||||
|
|
SENTRY MARINE 12 , 24, 32 VOLT BATTERY CHARGERS
The Sentry switchmode chargers are designed for unattended operation. When current is requested or the battery needs charging, the Sentry SM charger responds with the required output. The three-step charger brings your battery up to full charge very quickly. When the battery reaches a "float" condition, output is reduced to match that requested by the battery. The unit also acts as a power supply to operate your 12/24 volt systems directly, should the need arise. FLEXIBLE The Sentry SM chargers can be set for 115 or 230 VAC operation with a simple internal
adjustment. They can accommodate switchover. The chargers can work efficiently
with low supply voltages and poor-quality AC waveforms from operators. An easy
manual switch is used to select output for gel cell or lead acid batteries. Most
Sentry SM models offer three independent outputs for charging three separate battery banks
simultaneously. The 12V, 10 and 20 amp models provide two outputs. QUALITY The Sentry SM chargers are built to ABYC and UL standards and are CE certified for export to Europe. The units will not affect other onboard electronics. They are designed with protection against over temperature, short circuit and reversed polarity, and are equipped with input and output fuses. They are ignition protected and current limited. EASY Operating the Sentry SM charger couldn't be easier. You turn it on and leave it on. That's all. Convenient front panel indicators give a readout of system status. An optional remote indicator panel is also available for mounting outside the engine room. BATTERY OPTIONS The optional battery voltage indicator gives you an easy to real LED bargraph showing
battery status. The microprocessor based Battery Supervisor provides a digital
display of temperatures, battery voltages, alarms and other useful information for up to
three banks of batteries. |
|
Top of Page
COPYRIGHT 2008 MARINE PARTSFINDERS® |
